DTF SAMPLE PACK
Discover the perfect settings for your designs with our DTF Sample Pack! This specialized pack offers smaller designs in a variety of colors, allowing you to easily test your time and temperature settings. Fine tune your results and create stunning products with confidence. Order now and elevate your designs to the next level!
-
-
APPLICATION INSTRUCTIONS
*Due to difference in heat press brands, you may need to alter these instructions to best fit your individual press. We suggest ordering a few extra samples to
- TIME: 15 SECONDS
- TEMP: 325˚F
OUR DTF TRANSFERS ARE HOT PEEL!
Step 1: Adjust Settings & Prepare your Garment
Set your time and temperature to our recommended settings:
Temperature: 325˚F
Pressure: Heavy PressurePre-press your garment for 5-10 seconds at 325˚F.
Step 2: Load Garment, Place Transfer, and Press!
Lay garment down on the lower platen, making sure seams, zippers, etc are off the edge. This ensures even application. Place the transfer print-side down so that the ink is touching the garment - make sure it's not upside down! The clear film is super helpful with making sure you're placing the transfer correctly.
Press the transfer for 15 seconds at 325˚F. Our DTF transfers are HOT PEEL. Immediately after the platen opens up let the transfer cool for 5-10 seconds, hold the garment steady, grab a corner of the paper, and peel diagonally and quickly in a smooth, deliberate motion. We recommend using an old shirt to rub across the garment to cool it down a little faster.
Step 3: Finish it Off!
A post-press really helps to seal the transfer to the garment. Now it's time to finish it off!
Pro tip: Use a scrap t-shirt for your post press! This will give your print the look and feel of the the t shirt helping to soften the print and provide the best texture possible.
Repress your garment for an additional 5 seconds.
-