DTF GANG SHEET BUILDER
Before submitting your order, please make sure you have read and understand the following:
- The artwork you have submitted is print ready
- We will print your artwork as is
- Double check your image sizing. We will not alter the size of your images once submitted
- We are not responsible for mistakes made during the gang sheet building process.
- Due to the custom nature of this product, no refunds will be allowed.
APPLICATION INSTRUCTIONS
*Due to difference in heat press brands, you may need to alter these instructions to best fit your individual press. We suggest ordering a few extra samples to
- TIME: 8-10 SECONDS
- TEMP: 325˚F
OUR DTF TRANSFERS ARE HOT PEEL!
Step 1: Adjust Settings & Prepare your Garment
Set your time and temperature to our recommended settings:
Temperature: 325˚F
Pressure: Heavy Pressure
Pre-press your garment for 5-10 seconds at 325˚F.
Step 2: Load Garment, Place Transfer, and Press!
Lay garment down on the lower platen, making sure seams, zippers, etc are off the edge. This ensures even application. Place the transfer print-side down so that the ink is touching the garment - make sure it's not upside down! The clear film is super helpful with making sure you're placing the transfer correctly.
Press the transfer for 15 seconds at 325˚F. Our DTF transfers are a hot peel. Allow the garment to cool for 5-10 seconds after pressing, hold the garment steady, grab a corner of the paper, and peel diagonally and quickly in a smooth, deliberate motion.
Step 3: Finish it Off!
A post-press really helps to seal the transfer to the garment. Now it's time to finish it off!
Pro tip: Use a scrap t-shirt for your post press! This will give your print the look and feel of the the t shirt helping to soften the print and provide the best texture possible.
Repress your garment for an additional 5 seconds.